Click on any question below to view the answer. If still have a question, please fill out our contact form and we will get back to you quickly!
You will receive your StripMeister wire stripping machine within 5-7 business days from the date of order.
StripMeister support is available Monday through Friday 8:00am – 8:00pm EST. You can reach StripMeister support by calling 1-800-681-8494 or by emailing email@example.com
You can order a replacement feeder shaft by clicking this link or by calling our customer service at 1-800-681-8494 Monday through Friday 8:00am – 8:00pm EST
Depending on the power of the machines RPM, diameter, condition of and type of wire the following is an approximate estimate.
Running the drill at 300 RPM will on average strip 350ft per minute.
Running the drill at 150 RPM will on average strip 175ft per minute.
The StripMeister Automatic Wire Stripping Machine can strip 3 mm up to 20.1 mm.
The StripMesiter E500 and E2000 wire strippers can strip wire at a rate of 70 to 110 feet per minute.
StripMeister recommends using the variable speed control to start slow and as the wire feeds through the StripMeister to increase the speed to a comfortable pace.
The blade on this wire stripping machine is specifically designed for this very application and will give you years of continuous performance. This wire stripper is designed so that you CANNOT accidently lower the blade onto the wire feeders. Unless you attempt to cut wire which is outside the intended use of this stripping machine, you will not run into any problems
The StripMeister automatic wire stripper cannot cut aluminum or steel armored wire. The only way the StripMeister can cut this wire is if you use standard wire cutters to remove the armor first.
This StripMeister automatic wire stripper can cut wire from #18 AWG to 250 MCM Diameters from 0.100″ (3mm) up to 0.79″ (20.1mm)
The blade on the StripMeister wire stripping machines are precision engineered for each machine and will last anywhere from eight thousand feet of scrap wire all the way to forty thousand feet of scrap wire.
The StripMeister automatic wire stripping machine can strip house wire, Romex 1 & 2, XLP, THNN, XHHW, welding cable, rubber cord, old style cloth insulation and tray cable just to mention a few!
Our StripMeister Original wire stripping machine will ship from the closest distribution center to the delivery address.
Once you have stripped your wire, you can bring your copper wire to any local scrap yard. These yards are readily available in most urban areas and can be found in your local directories! This is an excellent means of recycling copper wire!
Well, that all depends on the size of wire you are stripping. This picture depicts the ‘loot’ for one hour’s worth of wire stripping. The yield was 51.21 lbs. As you can see, there was a variety of sizes being stripped in that hour. The sizes shown are a range from #14 up to 3/O.
Listed below are results from tests done with the StripMeister in a single hours time:
#8 = 42 lbs
#3 = 105 lbs
3/O = 216 lbs
Again, that all depends on the size of copper wire that you are stripping with the StripMeister. We yielded 51.21 lbs in one hour. At approximately $3.00/lb you will net a nifty $153.63, not a bad little return for an hour’s worth of stripping.
Its called serialized engraving and there are various reasons for this feature:
- The StripMeister is produced in one of the most advanced production facilities in North America under strict ISO9001:2008 Quality Standards.
- The serialization enables the manufacturer to trace the StripMeister from start to finish.
- Upon purchasing the unit, the buyer can register their unit with the serial number indicated on the machine at www.stripmeister.co.uk/warranty to ensure that their warranty is activated.
- It will also help you to identify your personal cable stripper if you work in a big shop or with other tradesmen.
Replacement blades for the StripMeister automatic wire stripper can be ordered straight off of our webpage or by following this link.
For optimum performance, we recommend that you do not exceed 350 RPM on your StripMeister copper wire stripper.
When purchasing a StripMeister automatic wire stripper, you can select your preferred payment method during checkout. Available secure payment options are PayPal, Visa, MasterCard and American Express.
100% yes! We use PayPal as a payment processor as they are the global leader in simple online payment processing . Once you proceed to check out your order, you will be redirected to PayPal to securely use your credit card or PayPal account on their servers. In fact, using your credit card or PayPal account on PayPal is more secure than giving your credit card info over the Phone in most cases.
No. The StripMeister is the ideal wire stripper due to that fact that it will accommodate any drill gun with a min. 5/16″ drill chuck or larger making it the best wire stripper around!
No. Just a 4mm Allen key
There is really no maintenance required but like all tools, keeping your StripMeister wire stripping tool clean cannot hurt – only makes it last longer!
Yes, we ship our StripMeister world wide!
Copper wire recycling is a great way to help the environment by ensuring all pieces go where they are supposed to go and not contaminate the landfills. An added benefit is you make cash while doing it!
You can purchase the StripMeister wire stripping machine on our website http://www.StripMeister.co.uk or by calling our customer service at 1-800-681-8494 Monday through Friday 8:00am – 8:00pm EST