Customer Gallery

I have been stripping copper wire by using a knife for years. I got this little drill operated machine and WOW was I impressed, this tool is awesome. I was able to strip about 10 pounds of wire in an hour.

Love the ease of use and how quickly you can turn a box of wires into clean copper. There is no better drill powdered wire stripper on the market. Everyone I know about and watching scraping on YouTube swear by the stripmeister. Definitely the best of the best.

OMG!!! I love this thing! Wish I had this years ago. I had 2-3 buckets of stranded and solid #10 and #12 wire, I had it all stripped out in a little over 2 hours. Best $149 I have spent this year already.

I am upset I waited so long to purchase the Stripmeister. I waisted money on cheap knockoffs that never worked properly. The Stripmeister is the type of product that makes people understand the phrase ‘you get what you pay for’ because it just works. The wire stays right in the middle of the unit every time without slipping off I don’t know how they do it but this little machine has so much thought put into it and it really shows how dedicated the people at Stripmeister are to providing a quality product to their customers. I can’t say enough about this little stripper so if you are still trying to decide on the stripmeister or a cheaper stripper just pull the trigger on the stripmeister I would have gladly paid double for this stripper. A million stars for the Stripmeister.

Very well made and durable. Easy to use ( I figured it out very quickly even without watching the videos). Stripped 16 ga up to 3/0 with no problems. Had a mishap with shipping and within minutes of me emailing the support department I had a response. Less than an hour later, Dave called me and said he was taking care of it. Great customer service. I doubt you’ll get that from the cheaper ones on the market. Spend a little extra and never need to buy a new one.

StripMeister is a great product what else can you say. It’s very well thought out in its design, is simple to set up and use. So far I have stripped out a bunch of 12/2 romex left overs and various size aluminum from #8 to 4/0. Very simple set it up and have at it.

Love the ease of use and how quickly you can turn a box of wires into clean copper. There is no better drill powdered wire stripper on the market. Everyone I know about and watching scraping on YouTube swear by the stripmeister. Definitely the best of the best.

The machine works very fast, no more sore hands. I used to strip all wire by hand, wish I had one of these 20yrs ago. I made all the money I paid, plus some in about 3 hrs.

soooo easy to use. didn’t take me long at all to get my investment back. finally something that WORKS without screwing around…

Only took a few hours to strips over 300 lbs of wire from #6 all the way down to #12 this thing didn’t skip a beat just kept on going. Worked perfect! Wish I would have found out about it a long time ago.

We’ve been ecstatic about our E250. We’ve easily stripped 14, 12, 10 & 8 gauge wire. Proof is in the 7 drums. 2,500 lbs to the bank.

I have been stripping wire with my E-250 every day since I purchased it last year. This stripper is the best tool I have ever bought. As you can see from my pictures I strip mostly extension cord, tv cord , and power cord wiring. Usually 18 gauge to 10 gauge wire and fill a box up every 2 days. Great machine, best investment I ever made!

My son Brevin using his favorite stripper! We have stripped 300# of 12 to 4 gauge and have about 650# to go. Stripmeister makes it profitable work by saving a lot of time. Glad I purchased the E250!

Money well spent here. I did a lot of research and found this to be well worth the money. Don’t waste your money on Amazon wire strippers. I’ve stripped over a mile of wire with this and it cuts the jackets like the first day of use. I even put quite a bit of 450 mcm through it and it was an amazing clean cut.

Hello my name is Tom. I have the E250. I strip any wire that fits in. Mostly 10-18 gauge. I’ve stripped about 800 lbs of copper and 100 lbs of aluminum wire. I love using this machine.

An excellent, well made machine. I watched a few videos on stripping various types of wire and found without much practice the stripper was very impressive. I’m glad I purchased my E250

This is our youngest special need’s Assistant Scoutmaster stripping wire for the troop scouts to remove the insulation. This way they are doing their part toward earning their way. It’s an awesome machine! Thank you!!

1,400 lbs of rainy day money cleaned to perfection by Strip Meister E250. 1 Man and machine done in under 20 hrs. Still going strong on original machine blade 5yrs later!!

My 93 year old Dad has been stripping wire for years. He recently purchased the E250 and is very please. The new machine makes this hobby so much more fun !

Stripping area and pot off gold. Stripped approximately 800 pounds of wire since Christmas, gauges 14, 12, 10, 8, 6, 4. The t-shirt is awesome! Get your stripper on!

It came and was easy to put the cutting edge on. It is wonderful and makes removing covering from copper wires a dream for my recycling them. It is a great value for anyone who has to uncover alot of wires from their plastic coverings.

I have had the original Stripmeister, the one thats drill powered, for several years. It’s been a solid stripper for me, but I recently upgraded to the E250. The difference is huge. The feed mechanism on the new one is so much better. Once I get it set,I can just keep feeding wire. So much faster.

My wife bought me my stripper for the garage!! I’ve gone through feeder gears and few blades over 5 years and about 12,000 lbs of wire from 16AWG through 1/0AWG.

I purchased the E350x several years ago. I have run about a half a million feet of #08 stranded copper insulated wire. This machine works flawlessly. I highly recommend this one for anyone stripping wire.

This machine is awesome, and well worth the investment. We go through thousands of feet of 1/0 welding cable each year, and the Strip-Meister is helping us immensely to streamline our cable recycling process. Set up is fast and simple, but make sure you pay extra attention to any tape on your cable that might hinder the cable feeding through whatever fitting you are using. Other than that, enjoy the time and money saved, and happy stripping!!

I have to give it 5 stars after the first day of use. I ran the machine by myself for about 2 1/2 hours and unloaded over $2100 of #1 copper at the scrap yard. I hope it has another $50,000 in it!

I cannot say enough good things about this machine. I never thought stripping wire for scrap could be this easy. I have run through all kinds of wire, UF, Romex, THHN, RW, MTW, etc. It all strips great. One man can’t keep up with how fast this thing can strip. The set up instructions on YouTube are dead on.

Excellent Product. Stripped 2000 lbs of 350 MCM Cu in about 6 hours. Over $5,000.00 salvage price. Cutter wheel still perfect. Just have to adjust depth so you’re not cutting into the Cu.

Took me about 4 hours of stripping wire to make my money back. Simple machine, easy to use. could not be more satisfied. The massive hoard of wire is going to disappear in a flash. stripped everything from #12 stranded to 350mcm, short runs & long runs.

For starters the men at STRIPMEISTER are genius. I bought the Original drill operated one 3 years, And have made thousands, upon thousands of dollars with that little bastard. I bought the E350 last week and all I can say is the sky is the limit. These machines definitely go hard in the paint for sure. Also I got a call from there customer service people giving me a heads up that my product shipped out that morning and it should be there in a few days. “That was over and beyond” excellent customer service which is very rare now days. And I respect the hell out of that. Very very very happy customer, thank y’all.

Use it to strip about 2500 Lbs of 500 MCM wire. Worked great with one person helping pull wire through while another help feed it. Most like would have be an to run by itself if the run of 500 MCM were cut down to 3’ length. Over and all very pleased with the machine.

Been stripping wire for over 25 years, just purchased the strip meister E350X, excellent machine ,extremely easy to set up and use. Very happy I purchased this after lots of research.

Incredible machine! I own an electrical contracting company and this machine saves at least 80% on labor of stripping scrap. Worth every penny….

The best investment someone can make. It pays for itself it a matter of hours. Your time and safety are invaluable and this saves both. I would 10/10 recommend for anyone considering one of these machines. It’s ease of use is a game changer.

The best tool money that I have spent in a very long time. The unit is very well built and functions better than I could have ever imagined. 3,289 pounds of copper stripped in less than 8 hours. I stripped everything from #10 THHN to 600 KCMIL. I found that if the unit is bolted to a solid and mostly immovable table, it will pull from small reels easily, all you you have to do is pull the jacket off of the wire. An EXCELLENT product.

This product is fantastic. This was a gift to my boyfriend for Christmas. He had an accident earlier this year when he was hand stripping wire and when the knife slipped and he slice open his knee. This is much safer, it works when it is cold outside and is much, much quicker. Thank you for a fantastic product. It was also delivered very quickly.

Worth every penny!! Wish I would have bough this years ago

I have owned the E1000 for about 30 days now and stripped 3500 lbs of copper. It has more than payed for its self. As a small electrical contractor I wish we would have made this purchase years ago. I had a good bit of 4/0 xhhw (thick insulation) that we demoed from a project so that is mostly what I have stripped. These were 100′-150′ runs. I was able to help the unit feed by pulling and peeling the insulation in one motion. Worked well to strip other sizes as well, tested from 6 thhn to 500mcm. On the lager sizes short pices work best and running it through twice once on either side makes it easier to peel the insulation. All of this was done with the original knife that came on the unit and it still looks like new. All I can say is if you are look for a well crafted stripper to increase your profits this is it. The only con would be with newer slicker insulation at larger size and long lengths could cause a feed issue due to weight and grip, but would be an easy fix with a helper to feed the wire to the unit.

I bought a different brand several years ago and spent more time adjusting, unclogging etc than it was worth. The StripMeister works great. No problems and no learning curve, I’ve got my young warehouse employee using it right now. Would recommend this product to anyone for any size wire.

Oh, man. This thing is Awesome. I got the Stripmeister E1000 because it had the 1/2hp motor and the amount of 500mcm and 750 cu we strip. It’s much safer than dragging a skinning knife across the wire and a heck of a lot faster. Once you get it dialed in to what you are working with, Life is much easier. Thumbs Up Stripmeister.

does a great job this is the 2nd one. I still have my first one and still use it all the time I have had the first one for 8 years, had to get a new one for bigger wire size

I bought this to strip a pile of large DLO cable scrap which was too large for my E350. E1000 exceeded my expectations and paid for itself in the first use. Great unit, and I’m hard to please.

Amazing stripper, bought this E1000 early on in my career as a second year apprentice with the IBEW Local #237. Within an hour I stripped 750mcm, 500mcm, and a bunch of 8awg and 10awg wire I have been saving for quite some time (too lazy to want to strip it). Bottom line, this is an investment that has already paid for itself 2x already within the my first use. Look forward to my future in the electrical industry and the wire $$$ to come. Thanks to all at Stripmeister for making a such an effortless tool to use that extremely well built!!!!

I Was a little Skeptical at first, but once i got it dialed in . I loved it ! right now I’ve been stripping 600,500&350 MCM copper . Like someone else mentioned ( i wish i had it 20 years ago)