Get all the portability and reliability of the StripMeister™ Original, now enhanced with 1/4 HP DC motor with a variable speed controller.
Strip wires hands free while maintaining the same trusted durability, precision and performance.
Built with high-quality components, the E250 offers precision and durability while providing quick and easy wire stripping.
Effortlessly untangling mangled wires without slips or jams. The Ultra Grip feeder’s advanced design ensures smooth, efficient operation for precise wire insulation stripping.
Adjustable Blade Height
Solid Aircraft Grade Aluminum Alloy
Heat Treated Steel Blade
Ultra Grip Wire Feeder
Quick Adjustable Wire Guide
1/4 HP 90V DC Motor
Variable Speed Controller
For detailed information on our machines, visit our comprehensive Knowledge Base – your all-in-one guide for everything StripMeister™. Get answers, tips, and expert insights anytime!
To check the fuse on the StripMeister E250 follow these 4 easy steps:
- Unplug the StripMeister E250
- Remove the drive cover
- Remove the 4 M3 screws
- Lift the cover carefully up and on the back side is the fuse
If the fuse needs to be replaced:
To replace the StripMeister E250 fuse you will need a T8A Ceramic Cylinder, Time-Lag, 250VAC/UL/CSA, 5x20mm Fuse (Allied Electronic #70160407). You can find the fuse by clicking this link.
Drive Cover
Back cover where screws are located
The Fuse Location
When you are stripping wire if the wire is slipping to the side it is normally not at the correct angle. We have a great setup video to stop the slipping of wire and you can find it by clicking this link.
Maintenance
To ensure smooth operation of your StripMeister E250 we recommend a maintenance of the following:
Make sure the machine is unplugged before performing any maintenance
1. Check oil level on the gear box monthly.
Before checking the oil, make sure the gear box is not hot. If oil is visible when the screw is removed from Oil filler hole on the gear box, the unit is still full. If not visible top up with manufacturers recommended gear oil (ISO VG320 or Petro of China CN320) until full.
For gear oil visit website:
http://www.pdblowers.com/pr91-roots-synthetic-lubricant-iso-vg-320-quart.php
2. Inspect blade for damage
3. Inspect and clean Feeder Drive of dirt and debris
4. Inspect whole machine for any loose parts
All of our machines come ready to use out of the box. Unpack your StripMeister and plug it in and begin stripping.
We only use one type of grease on our StripMeister machines and the grease can be found at any local hardware store. The type of grease we use is a general purpose white grease that is low odor, non staining, NLGI grade 2 grease.
We recommend using the provided hardware to fasten your StripMeister to a work bench or table.
Cat 5, Cat 5 and telephone wire are normally 22 and 20 gauge wire making it too small for the StripMeister E250 to strip. The smallest wire size the StripMeister E250 can do is #18 gauge wire.
The StripMeister E250 blade is CNC machined.
The StripMeister E250’s blade is made from heat treated and hardened tool steel for unbeatable quality.
With free shipping, we utilize a network of carriers to get your StripMeister the quickest to your location. You should receive your StripMeister E250 within 5 to 7 business days.
The StripMeister E250 can run on 220 Volts without any other needed configuration from StripMeister. Because the plug is regularly different for 220 volts you will need an adapter for the StripMeister.
The StripMeister E250 runs off any standard 110/120V household outlet.
Christopher Verified Owner –
Excellent machine
Greg Lwowski Verified Owner –
Product worked just as advertised. I don’t know why I didn’t purchase one of these sooner. The 250E is a quality item. I ran it for four hours, stripping all sizes of wire from 14 to 4/0. You can barely hear it running, and it’s simple to figure out. I would recommend this item to any one with the need.
Steve Grinde Verified Owner –
Works great!!
Robert J. Verified Owner –
The E250 is better than sliced bread. The machine sets up effortlessly and runs great. I had to look to see it was running. The machine is well built and thought out by the inventor. I highly recommend it to anyone who strips wire as I am in my 60’s and have been doing this by hand for years if I would have known about this years ago it would of changed my mind about keeping wire scrap in any quantity. again hats off to the inventor and builders of this fine equipment. Thank You.
Allen Hartman Verified Owner –
great wire stripper, easy to set up, just find what hole the wire will fit in, back off on the blade and run a short piece of wire about a foot long through the stripper and bring the cutting blade down a little on each pass until it cuts like you want it to and then you are ready to run the long wires through, easy to go from one wire size to another, i am glad that i bought this wire stripper, the E250 is a time saver and makes stripping a whole lot easier
Blake Sanders –
I have the E250 and I love it. It’s quiet and powerful. I use it every day and it never slows down.
Roy Jolivet –
Im a member of the ibew local 363. I’ve been an apprentice for the past 4 years and still have a few to go . I’ve stripped wire by hand for years with a knife. This e250 wire stripper handles everything i feed it with. This machine doesn’t care if the wire has paint, dirt, concrete mortar chunks, ( from masons ) , it chews it. Even with solid wire that’s been spliced and the end is a little bent or the wire has kinks in it, this machine dominates it, I’ve stripped miles of wire from 14awg all the way to almost the max with ease
Julia Verified Owner –
This machine is excellent and worth the price. Highly recommend for anyone stripping wire. Fast speed, easy to use, and great company to deal with.