Get all the portability and reliability of the StripMeister™ Original, now enhanced with 1/4 HP DC motor with a variable speed controller.
Strip wires hands free while maintaining the same trusted durability, precision and performance.
Built with high-quality components, the E250 offers precision and durability while providing quick and easy wire stripping.
Effortlessly untangling mangled wires without slips or jams. The Ultra Grip feeder’s advanced design ensures smooth, efficient operation for precise wire insulation stripping.
Adjustable Blade Height
Solid Aircraft Grade Aluminum Alloy
Heat Treated Steel Blade
Ultra Grip Wire Feeder
Quick Adjustable Wire Guide
1/4 HP 90V DC Motor
Variable Speed Controller
For detailed information on our machines, visit our comprehensive Knowledge Base – your all-in-one guide for everything StripMeister™. Get answers, tips, and expert insights anytime!
To check the fuse on the StripMeister E250 follow these 4 easy steps:
- Unplug the StripMeister E250
- Remove the drive cover
- Remove the 4 M3 screws
- Lift the cover carefully up and on the back side is the fuse
If the fuse needs to be replaced:
To replace the StripMeister E250 fuse you will need a T8A Ceramic Cylinder, Time-Lag, 250VAC/UL/CSA, 5x20mm Fuse (Allied Electronic #70160407). You can find the fuse by clicking this link.
Drive Cover
Back cover where screws are located
The Fuse Location
When you are stripping wire if the wire is slipping to the side it is normally not at the correct angle. We have a great setup video to stop the slipping of wire and you can find it by clicking this link.
Maintenance
To ensure smooth operation of your StripMeister E250 we recommend a maintenance of the following:
Make sure the machine is unplugged before performing any maintenance
1. Check oil level on the gear box monthly.
Before checking the oil, make sure the gear box is not hot. If oil is visible when the screw is removed from Oil filler hole on the gear box, the unit is still full. If not visible top up with manufacturers recommended gear oil (ISO VG320 or Petro of China CN320) until full.
For gear oil visit website:
http://www.pdblowers.com/pr91-roots-synthetic-lubricant-iso-vg-320-quart.php
2. Inspect blade for damage
3. Inspect and clean Feeder Drive of dirt and debris
4. Inspect whole machine for any loose parts
All of our machines come ready to use out of the box. Unpack your StripMeister and plug it in and begin stripping.
We only use one type of grease on our StripMeister machines and the grease can be found at any local hardware store. The type of grease we use is a general purpose white grease that is low odor, non staining, NLGI grade 2 grease.
We recommend using the provided hardware to fasten your StripMeister to a work bench or table.
Cat 5, Cat 5 and telephone wire are normally 22 and 20 gauge wire making it too small for the StripMeister E250 to strip. The smallest wire size the StripMeister E250 can do is #18 gauge wire.
The StripMeister E250 blade is CNC machined.
The StripMeister E250’s blade is made from heat treated and hardened tool steel for unbeatable quality.
With free shipping, we utilize a network of carriers to get your StripMeister the quickest to your location. You should receive your StripMeister E250 within 5 to 7 business days.
The StripMeister E250 can run on 220 Volts without any other needed configuration from StripMeister. Because the plug is regularly different for 220 volts you will need an adapter for the StripMeister.
The StripMeister E250 runs off any standard 110/120V household outlet.
Bill Verified Owner –
Shipped very quickly, and arrived in perfect condition due to excellent packaging. I have only had it 2 weeks, and to this point, the E250 machine is everything I hoped it would be. First off, it is very well built, and has a quality feel to it. It strips multiple sizes of wire flawlessly after getting the setup dialed in. It is easy to adjust for different gauges of wire, and the speed control works great. I debated for several years whether I should spend the money for one of these, and now I’m kicking myself for not doing it long ago! It will pay for itself quickly.
Mike mariani Verified Owner –
Good unit. It’s ready to go out of the box! It’s a great machine if you have a good load of copper to strip. Just be sure to strip as much of the same size wire at one time, so you don’t have to keep adjusting it. I’ve already got the money back I payed for this unit in about 6 hours
Dan Maciej –
This wire stripper works great! It’s makes stripping wire a lot faster and easier. It takes a little time to learn how to adjust it from one wire size to another. I just use short strips of wire and use those to fine tune the cutting wheel. I’m so glad I got a Stripmeister!
Quinton Isaac Verified Owner –
Scrapper from Trinidad, purchased a E250 machine a few days ago, made back my money in a couple hours, very quiet and does exactly what it was created to do, one thing the blades could have been a little sharper for the tuff wires, but very proud of this purchase otherwise. .. Thanks Stripmeister may upgrade in a few months..
Chris stupka –
This is a nice affordable stripper. Well built. The romex strip feature is a plus. I no longer have piles and barrels of insulated wire cluttering the shop up. No more getting hammered by the metal yards because it’s insulated. I will say I’ve had no. no success stripping thw stranded and some of the older rubber insulation types .
This machine paid for itself first time around.
Mike Verified Owner –
I’ve had the machine approximately 2 weeks. I haven’t had as much time to spend with it as i would like but so far this seems like a well built and easy to use machine. I did a lot of research looking for a cost effective and well built wire stripper. There’s a lot of different brands and types out there but the reviews kept sending me back to Stripmeister. So I bought one. Got it within 5 days and started using it right away. As other people have stated if you spend a little prep time with the wire your going to strip such as categorizing the size so you don’t have to keep adjusting the cutting blade (although it’s pretty easy to do) it will make everything go a little smoother and more efficiently. I have about 1000 lbs to strip of various sizes from 250 mcm to #14 so I know this machine will pay for itself in no time at all. Very easy to use, well built and I’m sure from the way its built I’ll get years of use from it. I also appreciate the extra parts such as the cutting blade and the motor brushes.
Daniel Batson Verified Owner –
Hello. Arrived quickly and well packed. Had a couple of questions, their customer service answered in a reasonable amount of time. Was able to get it up and running and happy with it.
Doug Manmiller Verified Owner –
I have only used it a few times so far, but it is easy to use and will pay for itself quickly. Very well made and easy to adjust to different wire sizes.