Skip to main content
1-800-681-8494
support@stripmeister.co.uk

Where can I check the fuse on the StripMeister E250?

To check the fuse on the StripMeister E250 follow these 4 easy steps:

  1. Unplug the StripMeister E250
  2. Remove the drive cover
  3. Remove the 4 M3 screws 
  4. Lift the cover carefully up and on the back side is the fuse

If the fuse needs to be replaced:

To replace the StripMeister E250 fuse you will need a T8A Ceramic Cylinder, Time-Lag, 250VAC/UL/CSA, 5x20mm Fuse (Allied Electronic #70160407). You can find the fuse by clicking this link.

Drive Cover

Back cover where screws are located


The Fuse Location