Skip to main content
1-800-681-8494
support@stripmeister.co.uk

Archives: Topics

Where do I grease on my StripMeister E2000X?

On the StripMeister E2000X there are 3 grease nipples. The first 2 are in the back of the machine on the knife carriage and these are for the knife slider. The other grease nipple is on the side of the StripMeister E2000X above the Caution sign. To see precisely where these nipples on the StripMeister E2000X is please consult page 6 of the StripMeister E2000X owners manual.

To see what type of grease you need click this link. 

Where can I check the fuse on the StripMeister E2000X?

To check the fuse on the StripMeister E2000X follow these 4 easy steps:

  1. Unplug the StripMeister E2000X
  2. Locate the panel below the power button. 
  3. Remove the 4 M3 screws 
  4. The fuse will be located directly inside.

If the fuse needs to be replaced:

To replace the StripMeister E2000X fuse you will need a 10A Ceramic Cylinder, Non-Resettable, Time-Lag, 250VAC, 5x20mm Fuse (Allied Electronic #70160162). You can find the fuse by clicking this link.

Can the StripMeister E2000X run on 220 Volts?

The StripMeister E2000X can run on 220 Volts without any other needed configuration from StripMeister. Because the plug is regularly different for 220 volts you will need an adapter for the StripMeister.