To check the fuse on the StripMeister E1000 follow these 4 easy steps:
If the fuse needs to be replaced:
To replace the StripMeister E1000 takes a 10A Ceramic Cylinder, Non-Resettable, Time-Lag, 250VAC, 5x20mm Fuse (Allied Electronic #70160162). You can find the fuse by clicking this link.
We recommend using the provided hardware to fasten your StripMeister to a work bench or table.
With there being so many different types of wire out there you will find that the StripMeister E1000 can strip a large majority of wire. We have tested Southwire cloth coated cable that is 750KCMIL with an OD of ~1.3′ and the thickness of the insulation jacket was ~0.2″ . The StripMeister E1000 stripped this wire with no problems.
If you have a specific wire you would like StripMeister to test for you please call us at 1-800-681-8494 and we can assist you with testing your wire on our machines.
Cat 5, Cat 5 and telephone wire are normally 22 and 20 gauge wire making it too small for the StripMeister E1000 to strip. The smallest wire size the StripMeister E1000 can do is #18 gauge wire.
Below you will find the rated input for the StripMeister E1000.
North America: 110- 120 V AC/10.0A, 60Hz, single phase
Europe: 200-220 V AC/5.0A, 50Hz, single phase
If you have any further questions please feel free to call us Monday through Friday 8 am – 6 pm Eastern Standard Time for support
We utilize a network of carriers to get your StripMeister the quickest to your location. You should receive your StripMeister within 5 to 7 business days.
The StripMeister E1000 can run on 220 Volts without any other needed configuration from StripMeister. Because the plug is regularly different for 220 volts you will need an adapter for the StripMeister.
You can register your StripMeister by clicking the corresponding link below.
The StripMeister E1000 runs off any standard 110/120V household outlet.
The StripMeister E1000 shipping dimensions are 20′ wide x 20″ High x 16″ deep.
The StripMeister E1000 has 1 phase.